Table of Contents
Advertisement
BIOS
4-5 Power Management Setup
Choose the "POWER MANAGEMENT SETUP" in the CMOS SETUP UTILITY to
display the following screen. This menu allows the user to modify the power
management parameters and IRQ signals. In general, these parameters should not be
changed unless it's absolutely necessary.
HDD Power Down
Powers down the hard disk drive after a preset period of system inactivity.
Options: Disabled, 1min ~ 15min.
Soft-Off by PBTN
Use this to select your soft-off function. The default is Instant Off.
Instant Off:
Delay 4 Second :
PwerOn After Pwr-Fail
This item enables your computer to automatically restart or return to its last operating
status after power returns from a power failure.
Off:
The system stays off after a power failure.
Former-Sts: The system returns to the state it was in just prior to the power failure.
Page 4-14
Figure 6: Power Management
Turns off the system instantly.
Turns off the system after a 4 second delay. If momentary press
of button, the system will go into Suspend Mode. Press the
power button again to make system back to work.
Advertisement
Table of Contents
