Cleaning The Machine - Cleaning Program - WMF 800 User Manual

Care
The coffee machine's milk system is rinsed with hot water.
Hot rinse water is emptied through the All-in-One spout.
The display prompts:
>
Slide the All-in-One spout downward, out of the top position
The display indicates:
>
Turn the milk hose anticlockwise, disconnecting it from the hot water spout
After the rinse, some hot water remains in the milk hose. Hold the open end of the milk hose
over the drip tray so that the remaining rinse water can run out.
If beverages with milk were prepared, after 20 minutes or at the latest when switching off,
the machine automatically requests a milk system rinse.
Confirm with the P button and perform the milk system rinse.
The All-in-One spout is cleaned by a pulse of steam at the same time.
The milk rinse can be delayed with the C button.
38

Cleaning the machine - Cleaning program

Do not drink the cleaning solution that comes out of the spout during cleaning.
>
Confirm machine cleaning with the P button
>
The individual steps appear on the display on request
lower spout into
beverage position
your selection pls
08:15 25.08.2008
machine cleaning
OK: P browse: -/+
empty drip tray
refill water tank
Follow manual milk system cleaning
instructions.
See Page 43
Start the care program without request,
see page 36
The cleaning program takes 6 minutes.