Table of Contents
Advertisement
FastTrak S150 SX4 / SX4000 / SX4000 Lite User Manual
Controller Configuration
Press 4 on the Main Menu screen to display the Controller Configuration screen
(below).
FastBuild (tm) Utility 1.xx (c) 2002-2005 Promise Technology, Inc.
Installed Memory Address:
Controller IRQ: 11
ATA IO Address: 9000
XOR and HDMA IO Address: 9400
Sequence Control IO Address: 9800
Flash and SRAM Memory Address: DE000000
[ESC] Exit
Figure 13.
The information in the System Resources Configuration section is for display
only. Two items may be useful to the user for troubleshooting:
Size of the SDRAM DIMM plugged into the FastTrak Controller card (see
•
Figures 2 and 3)
•
Controller IRQ used by the FastTrak card
The other items may be useful if you ever have to contact Technical Support.
[ Adapter Configuration Options ]
No Parameters Defined for Current Disk(s)...
[ System Resources Configuration ]
[ Keys Available ]
Controller configuration screen.
DE100000
Size: 512M
30
Advertisement
Chapters
Table of Contents
