Hardware Features; System Requirements; Operating System Support - Promise Technology FastTrak S150 SX4 User Manual

FastTrak S150 SX4 / SX4000 / SX4000 Lite User Manual

Hardware Features

32-bit / 66MHz
PCI bus mastering DMA with hardware scatter-gather engine for maximum
performance
Supports 266MB/sec burst data transfer rate across PCI bus
PCI Plug-and-Play support
Supports ACPI S1, S3 and S4
Single 168-pin DIMM slot for cache memory. 64 MB minimum / 256 MB
maximum (ECC or non-ECC, unbuffered, PC100 or above)
Supports multiple, concurrent data requests from OS
Co-exists with built-in ATA channels or other SCSI controllers

System Requirements

One bus mastering PCI slot (PCI v. 2.2 or 2.1 compliant)
One to four Ultra ATA disk drive(s) for dedicated use in the RAID array
(SX4000)
One to four Serial ATA disk drive(s) for dedicated use in the RAID array
(S150 SX4)

Operating System Support

Microsoft Windows 2000, XP, 2003 Server
RedHat Linux 8.0, 8.1
SuSE Linux 8.1, 8.2
Advanced Utilities
Built-in FastBuild BIOS utility for configuration
Auto configuration and optimization
View/Create/Delete array
Convert/Expand
Rebuilds data on replacement disks
6
FastTrak SX4000 Lite supports a 33Mhz PCI interface.
7
An SDRAM DIMM is required for operation but not included with the FastTrak Controller
card. The optimal amount of memory depends on your RAID application.
8
These features do not apply to FastTrak SX4000 Lite.
6
PCI interface compliant to PCI Rev 2.2
8
array
70
7