Setting A Disk Array As Bootable - Promise Technology FastTrak S150 SX4 User Manual

Setting a Disk Array as Bootable

You may select which defined array will be used as the bootable array from the
Define Array Menu (press 2 in the Main Menu). Press the up and down arrow
keys to highlight the desired array and press the Spacebar. The system will now
recognize this as the first array and an asterisk (*) will appear next to the array
number indicating it as bootable (see below).
FastBuild Array Utility 2.xx (c) 2002-2005 Promise Technology, Inc.
Array No
Array 1
*
Array 2
Array 3
Array 4
Note: * --Bootable Array
[ ] Up [ ] Down
Figure 10.
You must reconfigure your PC's or server's BIOS in order use
FastTrak card as the bootable controller. The system will then
use the bootable array as the (fixed) boot C: drive.
[ Define Array Menu ]
RAID Level Total Drv
RAID5
-----
-----
-----
[ Keys Available ]
[ESC] Exit
Assigning a Bootable Array.
Capacity (MB)
3 161260
----- -----
----- -----
---- -----
[Enter] Select [Space] Change Boot Drive
Important
27
Chapter 3: FastBuild™ Utility
Status
Functional
-----
-----
-----