Table of Contents
Advertisement
FastTrak BIOS Reference
When the FastTrak BIOS loads during bootup, it displays pertinent information
about the RAID arrays that it finds. Then, it displays Press Ctrl-F to allow you to
enter the Array BIOS Configuration Utility (below).
FastTrak S150 SX4 (tm) BIOS Version 1.10.02
(c) 2002 Promise Technology, Inc. All rights reserved.
Installed DIMM Size: 128 MB
No Array is defined...
Press <Ctrl-F> to enter FastBuild (tm) Utility...
<
Press <ESC> to continue booting...
Figure 4.
The information displayed in the form of a small table contains the following
properties:
ID
These represent a unique ID number assigned to each RAID array identified by
the BIOS.
Mode
This identifies the RAID mode configuration that the array is defined as.
Size
This is the MB (Megabyte) data size of the indicated array.
Track-Mapping
This is the CHS (Cylinder/Head/Sector) equivalent of the array geometry as
hosted by the FastTrak BIOS int 13h disk services.
First-time BIOS Startup for FastTrak S150 SX4.
The SX4000 / SX4000 Lite is similar.
Chapter 3: FastBuild™ Utility
15
Advertisement
Chapters
Table of Contents
