Connecting The Power Supply; Final Check - LightSpeed Technologies Redcat User Manual

4. CONNECTING THE POWER SUPPLY

the power supply and AC power cord. Connect the AC power cord into
1. Locate
the DC power supply.
the power supply into the REDCAT base as shown. If desired, remove the
2. Place
plastic cover of the included Velcro strip and attach the supply to the Velcro for
a more secure fit.
the DC connector into the "DC POWER INPUT" connector on the bottom
3. Insert
of the REDCAT and plug the other end to an electrical outlet.

FINAL CHECK

1. Ensure all cables are appropriately routed out of walking paths and work areas to
prevent safety hazards to individuals in the room.
2. The REDCAT packing material should be kept for warranty shipping purposes.
3. Proceed to initial set-up to test system performance.
17 | REDCAT User Manual
3
Leave microphones charging so they are ready for use.
Microphones will need to be charged on a daily basis.
1
2
R E D C A T U s e r M a n u a l