Charging The Redmike - LightSpeed Technologies Redcat User Manual

CHARGING THE REDMIKE

power cord
1. Plug
into the cradle
charger and
then plug the
AC end into an
electrical outlet.
that the REDMIKE
2. Ensure
is turned OFF.
Helpful Hint
• REDMIKE incorporates alkaline protection into the microphone design.
Replacement AA NiMH batteries may only be purchased through
Lightspeed technologies (part # BA-NH2A27).
• A blinking LED indicates a charging error (see page 7). Be sure to use
a Lightspeed rechargeable sensing battery.
the REDMIKE into the cradle. The LED on
3. Place
the cradle will glow RED indicating charging has
started. When the REDMIKE is fully charged the
LED on the cradle charger will change to GREEN.
R E D C A T U s e r M a n u a l
REDCAT User Manual | 22