Initial Set-Up: Optional - LightSpeed Technologies Redcat User Manual

INITIAL SET-UP: OPTIONAL HM-70
1. Ensure the REDCAT is ON. The RED
LED on the switch will glow.
2. Turn on the HM-70 by sliding the switch to
the top position.
4. speaking in a
While
normal voice, increase
the B VOLUME level
until your voice is barely
audible. REMEMBER: This
equipment is designed to
supplement and distribute
the user's voice so they
are able to speak in a
conversational tone. Having
the volume set too high
will result in feedback and
listener fatigue.
21 | REDCAT User Manual
3. the barrel in the center section.
Grip
Avoid covering the infrared emitters
circling the base. This could interrupt
signal transmission.
R E D C A T U s e r M a n u a l