Connecting The Power Supply - LightSpeed Technologies Topcat User Manual

6. CONNECTING THE POWER SUPPLY

The Media Connector (MC) can be powered in either of two ways:
• AC power from a nearby electrical outlet
• USB power from a computer
Use whichever power source is most convenient to the location of the MC.
AC Power
1. Locate the DC port at the rear of
the MC.
2. Place the DC end of power cord
into DC port at the rear of the MC.
3. Place the AC end of power cord
into an electrical outlet.
4. Press the power-on button located
on the front of the MC.
USB Power
If the primary audio source is
a computer, it might be more
convenient to use the supplied USB
cable to power the MC from that
computer.
1. Insert USB cable into MC.
2. Insert USB cable into any available
USB port on the computer.
3. Press the power-on button located
on the front of the MC.
You have now set-up the MC and it is
ready to use.
16
Audio Input
AUDIO AUDIO AUDIO AUDIO AUDIO
1 2 3 4 VOLUME
5V 1.0A USB
POWER
5V 1.0A USB
POWER
5V 1.0A USB
POWER
Audio Input
AUDIO AUDIO AUDIO AUDIO AUDIO
1 2 3 4
VOLUME
5V 1.0A USB
POWER
Audio Input
AUDIO AUDIO AUDIO AU
1 2 3
Audio Input
AUDIO AUDIO AUDIO AUDIO AUDIO
1 2 3 4 VOLUM
4