Table of Contents
Advertisement
Passwords
Passwords are provided to limit access to the VSR, WebServer, and the Video Navigator software. It is
recommended that the default passwords be changed after installation is complete. As a security measure,
store the password in the administrator's secured files or in a limited access area.
Table 1.
Default software passwords
Password name
Admin Password
Log In Password
Table 2.
Default hardware passwords
Password name
Advanced Menu
Password
Factory Password
Ethernet Password
Ethernet Access Reset
Password
DDNS Password
Default IP Addresses
These settings provide access and control of the VSR over an IP network.
Table 3.
Default IP addresses
Address name
IP Address
Subnet Mask
Gateway Address
Note:
These IP addresses should be changed before you connect to your IP network. Contact your network administrator to
obtain your network specific addresses.
Program
WebServer
Video Navigator
Function
Provides access to the
Advances menu for the
installer
Restores the unit to the
factory defaults
Limits access over Ethernet
Resets the Ethernet
password
Provides access to the
Domain Name Server
Changeable by user
Changeable by user
Yes, through the webserver
Yes, through the Security
menu
Changeable by user
See page 51
No
See page 51
No
See page 51
Yes
Yes
Yes
Default password
admin
12345
Default password
0 0 0 0
8 1 1 1
No default password
1 1 1 1
2 2 2 2
Default user
3.112.55.10
255.255.254.0
3.112.54.1
5
Advertisement
Table of Contents
