Passwords; Default Ip Addresses - GE Security SymDec 16 plus 4 User Manual

Passwords

Passwords are provided to limit access to the SymDec 16 plus 4, WebServer, and the SymNav software. It is
recommended that the default passwords be changed after installation is complete. As a security measure,
store the passwords in the administrator's secured files or in a limited access area.
Table 1. Default passwords
Password name
user 1
user 2
user 3

Default IP Addresses

These settings provide access and control of the SymDec 16 plus 4 over an IP network.The default Ethernet
setting is DHCP. To access these IP addresses the Ethernet setting must be changed to Static.
Table 2. Default IP addresses
Address name
IP Address
Subnet Mask
Gateway Address
These IP addresses should be changed before you connect to your IP network. Contact your network administrator to obtain your
network specific addresses.
Program
On Screen Display (OSD)
On Screen Display (OSD)
On Screen Display (OSD)
Changeable by user
Changeable by user
Yes, through the Main menu
Yes, through the Main menu
Yes, through the Main menu
Yes
Yes
Yes
Introduction
Default password
111111
222222
333333
Default user
192.168.1.82
255.255.255.0
192.168.1.1
Chapter 1 7