Installation Environment; Associated Equipment - GE Security VSR-300 User Manual

4 VSR
User Manual

Installation Environment

Power: Ensure that the site's AC power is stable and within the rated voltage of the external power
supply. If the site's AC power is likely to have spikes or power dips, use power line conditioning
or an Uninterruptable Power Supply (UPS).
Ventilation: Install the unit in a well-ventilated area. Take note of the locations of the cooling vents
in the unit's enclosure, and ensure that they are not obstructed.
Temperature: Observe the unit's ambient temperature specifications when choosing a location space.
Extremes of heat or cold beyond the specified operating temperature limits may cause the unit to
fail. Do not install the unit on top of other hot equipment.
Moisture: Do not expose the unit to rain or moisture. Moisture can damage the internal components.
Do not install this unit near sources of water.
Handling Hard Disks: This unit has a built-in hard disk (HD). Be sure to observe the following
points carefully when operating, setting up, and servicing the unit.
• Do not subject the unit to shocks or vibration. Shocks and vibration may damage the HD or cause
corruption of the data stored on the unit.
• Do not move the unit while the power is turned on.
• Do not move the unit for 30 seconds after tuning off the power.
• When transporting the unit, pack it securely using the original packing materials.

Associated Equipment

Associated equipment you might need:
• Analog camera.
• IP Camera.
• Analog monitor to view video.
• Alarm input devices: Pressure sensors, motion detectors, etc.
• Alarm output devices: Buzzers, Sirens, Flashing Lights, etc.
• A PC connected via ethernet cable.
• An RJ45 to DB9-F null modem cable.
• A microphone with amplification.
• Speakers to hear audio.
• Symnet encoder/decoder to receive or send video.
For instructions regarding the connection of the associated security equipment in your system, please consult
the instruction manual of the associated equipment.