Main Menu / Display Settings - GE Security VSR-300 User Manual

36 VSR
User Manual
2. Press the Pause button to select the desired character set.
3. Use the Arrow Buttons to navigate the cursor in the camera title.
4. Use the Arrow Buttons to navigate the cursor in the character bank.
5. Press the Rec UP button to insert a blank character or press the Rec Dn button to insert the selected
character.
6. When finished editing the title, press the Enter button to exit the edit mode.
7. Save changes and exit the menu: Select [OK], then press the Enter button.
8. Exit the menu without making changes: press the Menu button, or select [CANCEL], then press
the Enter button.

Main Menu / Display Settings

Figure 37. The display settings menu
Use this menu to specify what status information will be displayed on the output monitor. Select On or Off, for
the following items.
• The current time and date.
• The remaining amount of time before the hard disk runs out of record space.
• The time and date of the last alarm.
• The Record or Playback Speed.
• During Playback, the time and date the recording was made.
• The Camera title.
Main Menu / Display Settings / Current Time / Date
To display the current Time and Date near the upper right hand corner of the output monitor, select ON. Use the
Arrow buttons to select On or Off.
Press the Enter button to confirm the selection and exit the menu, or press the Menu button to exit the menu
without making changes.