Streaming Settings For Udp Unicast Or Tcp - GE Security VSR-300 User Manual

61

Streaming settings for UDP unicast or TCP

Figure 67. A sample network configuration
Figure 13 illustrates streaming settings for a UDP unicast from the SymNet to the VSR.
The VSR-4 is setup as a receiver in Normal mode with the Receiver Cam Map IP address set at 192.168.10.20
(The IP address of the sender). The SymNet is setup as a sender with the streaming address set at
192.168.10.40 The IP address of the receiver. Once these settings are saved on their respective web pages the
SymNet will begin sending streaming video (once requested) and the VSR-4 will begin receiving streaming
video.
All the settings on the Advanced Streaming settings must match between the sender and the receiver.
In this configuration both the VSR and VSR-4 are able to receive a video stream from the SymNet or IP
Camera.