Alarm Out - GE Security VSR-300 User Manual

Figure 4. Accessory PCB
Table 5. Accessory PCB pinouts
Pin
1
2
3
4
5
6
7
8
9
10
Alarm In
An alarm condition can be activated by an Active Low TTL input or by relay contact devices such as pressure
pads, passive infrared, door switches, or other similar devices.

Alarm Out

The Alarm output is activated while the Alarm Input is active. The Alarm output is only active for the duration
of the alarm event.
Record Start In
Record Start In will place the unit in Record mode when activated. Compatible with the Disk End Out signal
from a second unit.
Use
Alarm In
Alarm Out
Record Start In
Alarm Record Reset
Not used
Error Out
Ground
Video Loss Out
Disk End Out
Ground
9