The Search Interface (F) - GE Security VSR-300 User Manual

18 VSR
User Manual
Single Frame Advance (Up Arrow)
While in Pause mode, press the Single Frame Advance button or press the up arrow on your keyboard. The
unit will advance a single frame, then return to Pause mode.
Single Frame Rewind (Down Arrow)
While in Pause mode, press the Single Frame Rewind button or the down arrow on your keyboard. The unit
will reverse play a single frame, then return to Pause mode.
Start of Data & End of Data
If the start or end of data is reached during playback, START OF DATA or END OF DATA is indicated near the
upper left hand corner of the output monitor.

The Search Interface (F)

The Search Interface allows the user to search the hard disk for recorded events, such as an alarm condition, or
a previous recording session. For example, each time Record mode is activated, it is considered a separate
recording session.
To enter the Search Filters menu, press the Search button or press the F key on your keyboard. The first screen
displayed is the Disk Analysis screen. This screen is a graphical representation of the recorded video stored on
the internal hard disk.
Figure 8. The disk analysis screen
The left and right arrow keys on you keyboard move the two arrow cursors across the representation of the
recorded video. As the cursors move across the screen the corresponding disk time is indicated in the upper
right of the screen. The video representations are color-coded by category. The up and down arrow keys
zooms the display. The Lowest level (most detail) is indicated on screen with an (L). Pressing the Enter button
will start Playback from the cursor location.