Passwords; Default Ip Addresses - GE Security SymSafe User Manual

8 SymSafe/SymSafe Pro
User Manual

Passwords

Passwords are provided to limit access to the SymSafe, WebServer, and the SymNav software. It is
recommended that the default passwords be changed after installation is complete. As a security measure,
store the passwords in the administrator's secured files or in a limited access area.
Table 1. Default passwords
Password name
Log In Password user 1
Log In Password user 2
Log In Password user 3

Default IP Addresses

These settings provide access and control of the SymSafe over an IP network.
Table 2.

Default IP addresses

Address name
IP Address
Subnet Mask
Gateway Address
These IP addresses should be changed before you connect to your IP network. Contact your network administrator to obtain your
network specific addresses.
Program
On Screen Display (OSD)
On Screen Display (OSD)
On Screen Display (OSD)
Changeable by user
Changeable by user
Yes, through the Main menu
Yes, through the Main menu
Yes, through the Main menu
Yes
Yes
Yes
Default password
111111
222222
333333
Default user
192.168.1.82
255.255.255.0
192.168.1.1