Product Contents; Installation Environment - GE Security SymSafe User Manual

Figure 1. SymSafe/SymSafe Pro box contents

Product contents

The SymSafe/SymSafe Pro system consists of the following:
• The SymSafe unit
• 3 power cords (US, British, and EU)
• SymSafe user manual
• SymNav software CD
• Alarm I/O connectors (attached to back panel)
• IR remote controller with batteries
Inspect the package and contents for visible damage. If any components are damaged or missing, do not use
the unit; contact the supplier immediately. If you need to return the unit, you must ship it in the original box.

Installation Environment

Power: Ensure that the site's AC power is stable and within the rated voltage of the external power
supply. If the site's AC power is likely to have spikes or power dips, use power line conditioning
or an Uninterruptable Power Supply (UPS).
Ventilation: Install the unit in a well-ventilated area. Take note of the locations of the cooling vents
in the unit's enclosure, and ensure that they are not obstructed.
Temperature: Observe the unit's ambient temperature specifications when choosing a location space.
Extremes of heat or cold beyond the specified operating temperature limits may cause the unit to
fail. Do not install the unit on top of other hot equipment.
Moisture: Do not expose the unit to rain or moisture. Moisture can damage the internal components.
Do not install this unit near sources of water.
Chapter 1 5
Introduction