Accu-Chek Mobile User Manual page 73

The cap must be on the lancing device when
you obtain blood. Without the cap, the lancet
would penetrate too deeply and you would feel
more pain than necessary.
2 Press the lancing device firmly against the chosen
puncture site.
you will feel a slightly raised ring against your skin; this
is the pin-hole through which the tip of the lancet
emerges.
3 Press the multifunction button all the way down.
This triggers the lancet, which penetrates the skin to
the penetration depth set.
4 If necessary, massage the finger in the direction of
the fingertip to encourage a blood drop to form.
The blood drop must be large enough and well-formed.
Testing blood glucose 3
73