Related Manuals for Havis DS-PAN-600 series
Summary of Contents for Havis DS-PAN-600 series
- Page 1 Owner’s Manual Havis Docking Station For Panasonic Toughbook H2 DS-PAN-600 Series DS-PAN-601 DS-PAN-602 DS-PAN-603 www.havis.com 1-800-524-9900...
- Page 2 Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-PAN-600 Series Docking Station for the Panasonic Toughbook H2. For questions regarding the set-up of your DS-PAN-600 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional...
-
Page 3: Table Of Contents
11.3” ( 28.7 cm) W x 4.0” ( 10.1 cm ) D x 11.8” ( 30.0 cm ) H Weight 4.6 lbs ( 2.1 kg ) Operating Environment -20° C to 60° C ( -4° F to 140°F ) Storage Environment -40° C to 85° C ( -40° F to 185° F ) www.havis.com • 1-800-524-9900... -
Page 4: Parts Included
Parts Included Docking Station Barrel Lock Latch Handle Bumpers Mounting Bracket (shown assembled) Docking Connector Mounting Bracket Hardware Kit This Hardware Kit includes: 1. Zip Ties (6) 2. Keys (2) 3. 1/4”-20 x 5/8” long Button Head Screws (4) 4. 1/2”-20 X 3/8” Long Pan Head Screws (5) 5. -
Page 5: Port Replication Capability
Mounting Bracket to the Motion Device using (3) 1/4“-20 x 5/8” long screws (Hardware Kit Item 3). Torque screws to 80 in-lbs (9.0Nm) ± 10%. NOTE: Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion Devices as well as most competitors’... - Page 6 Installation and Cable Management (continued) Connect all needed peripheral cables to the Docking Station and bundle them to the Strain Relief Bracket using the provided Zip Ties (Hardware Kit Item 1). Strain Relief NOTE: If you are mounting the optional Power Supply (Part # LPS-102) or Side Exiting USB Cable (Part # DS-DA-311), please refer to page 11 before continuing to Step 3.
- Page 7 Screws first (A), then the left side Screw second (B), and the right side Screw last (C). Torque screws to 80 in-lbs (9.0 Nm) ± 10%. Gather all cables to one side and tie off to unused holes on back side of Docking Station. Zip Tie to secure cables www.havis.com • 1-800-524-9900...
- Page 8 Installation and Cable Management (continued) Create a service loop with cables to ensure that no tension is on the connectors and to enable intended motion. Tie off cables onto a stationary part of the mounting system. This loop must be large enough to allow full range of expected rotation and extension without stressing connections.
-
Page 9: Operation - Docking
Docking Station. While keeping downward pressure on the computer, pivot it into Docking Station so the handle snaps into Latch Mechanism. For theft deterrence, secure computer by locking Docking Station with supplied key (Hardware Kit Item 2). www.havis.com • 1-800-524-9900... -
Page 10: Operation - Undocking
Operation - Undocking If previously locked, unlock Docking Station using supplied key. While holding computer with one hand, push down on Latch Mechanism with thumb. While Latch Mechansim is pushed down, carefully rock the top of the computer forward and lift out of Docking Station... -
Page 11: Optional Accessories
Secure Power Supply Brick to the bottom of Docking Station with the supplied hardware. Plug the Output Cable into the Power Supply Brick. Strain relief cable as needed. Continue on with Step 3 of Installation and Cable Management on Page 6. www.havis.com • 1-800-524-9900... - Page 12 Related Products Havis offers a wide variety of accessory products specifically for use with the DS-PAN-600 Series Docking Station. For more information or to order, please visit www.havis.com. DS-DA-311 Side Exiting USB Cable Allows for more convienent access for up to two (2) of the available USB 2.0 ports.