Resetting The Microprocessor; Resetting Memories (Only); Menu Resetting; Full Reset - Yaesu FTdx5000 Series Operating Manual

R M
Use this procedure to reset (clear out) the previously stored
Memory channels, without affecting any configuration
changes you may have made to the Menu settings.
1. Press the front panel [ POWER ] switch to turn the trans-
ceiver off.
2. Press and hold in the [ A M ] button; while holding it
in, press and hold in the front panel [ POWER ] switch
to turn the transceiver on. Once the transceiver comes
on, release the buttons.
M R
Use this procedure to restore the Menu settings to their
factory defaults, without affecting the memories you have
programmed.
1. Press the front panel [ POWER ] switch to turn the trans-
ceiver off.
2. Press and hold in the [ MENU ] button; while holding it
in, press and hold in the front panel [ POWER ] switch
to turn the transceiver on. Once the transceiver comes
on, release the buttons.
F R
Use this procedure to restore all Menu and Memory set-
tings to their original factory defaults. All Memories will
be cleared out by this procedure.
1. Press the front panel [ POWER ] switch to turn the trans-
ceiver off.
2. Press and hold in the [ FAST ] and [ LOCK ] buttons;
while holding them in, press and hold in the front panel
[ POWER ] switch to turn the transceiver on. Once the
transceiver comes on, release the switches.
FT 5000 O
R
O
M
B
M
[ POWER ] Switch
[ POWER ] Switch
[ POWER ] Switch
Y B
[ A M ] Button
[ MENU ] Button
[ FAST ] / [ LOCK ] Button
Page 7