Text Memory - Yaesu FTdx5000 Series Operating Manual

CW C
ONVENIENCE

TEXT Memory

The four channels of CW message memory (up to 50 characters total) may also be programmed using the text-entry
technique. This is somewhat slower than sending the message directly from your keyer paddle, but accuracy of character
spacing is ensured. Example 1: CQ CQ CQ DE W6DXC K} (20 characters)
You may also utilize another powerful feature of the CW Memory Keyer, the sequential Contest Number ("Countup")
feature. Example 2: 599 10 200 # K} (15 characters)
S T M
1. Press the [ MENU ] button briefly, to enter the Menu
mode.
2. Rotate the ( VFO-A )[ SELECT ] knob to select the CW
Memory Register you wish to store the message in.
For now, you are just selecting the message entry tech-
nique (Text entry).
025 KEY CW MEM1
026 KEY CW MEM2
027 KEY CW MEM3
028 KEY CW MEM4
029 KEY CW MEM5
3. Rotate the ( VFO-B )[ SELECT ] knob to set the selected
Memory Register to "TEXT". If you want to use the
Text method for message entry on all memories, set all
five Menu items (#025 ~ 029) to "TEXT".
4. Press and hold in the [ MENU ] button for two seconds
to save the new settings and exit.
Page 96
F
C M
ONTEST
( VFO-A )[ SELECT ] Knob
( VFO-B )[ SELECT ] Knob
[ MENU ] Button
EATURES
K
EMORY EYER
T M
1. Set the operating mode to CW.
2. Set the [ BK-IN ] button to "off".
3. Turn the internal Electronic Keyer "on" by briefly
pressing the [ KEYER ] button.
4. Press the FH-2's [ MEM ] key.
5. Press the [ 1 ] ~ [ 5 ] key on the FH-2 to
begin the memory storage process.
6. Use the FH-2's [ ] and [ ] keys to
set the cursor position and use the [ ]
and [ ] keys to choose the letter/num-
ber to be programmed in each slot of
the memory. In the case of the second
example above, the "#" character des-
ignates the slot where the Contest Num-
ber will appear.
A :
You may set the cursor position with the ( VFO-
A )[ SELECT ] knob, and then choose the letter/num-
ber with the ( VFO-B )[ SELECT ] knob.
FT
DX
P
CW Memory Register Number Message
Current Cursor Position
Select the cursor position Choose the letter/number
5000 O M
LOCK
ON OFF
LOCK
ON OFF
LOCK
ON OFF
Cursor