Resetting The Microprocessor; Resetting Memories (Only); Menu Resetting; Full Reset - Yaesu FTDX5000 Series Operating Manual

R M
ESETTING EMORIES
Use this procedure to reset (clear out) the previously stored
Memory channels, without affecting any configuration
changes you may have made to the Menu settings.
1. Press the front panel [ POWER ] switch to turn the
transceiver off.
2. Press and hold in the [ A
in, press and hold in the front panel [ POWER ] switch
to turn the transceiver on. Once the transceiver comes
on, release the buttons.
M R
ENU ESETTING
Use this procedure to restore the Menu settings to their
factory defaults, without affecting the memories you have
programmed.
1. Press the front panel [ POWER ] switch to turn the
transceiver off.
2. Press and hold in the [ MENU ] button; while holding
it in, press and hold in the front panel [ POWER ]
switch to turn the transceiver on. Once the transceiver
comes on, release the buttons.
F R
ULL ESET
Use this procedure to restore all Menu and Memory set-
tings to their original factory defaults. All Memories will
be cleared out by this procedure.
1. Press the front panel [ POWER ] switch to turn the
transceiver off.
2. Press and hold in the [ FAST ] and [ LOCK ] buttons;
while holding them in, press and hold in the front panel
[ POWER ] switch to turn the transceiver on. Once the
transceiver comes on, release the switches.
FT 5000 O
DX PERATING
R
ESETTING THE
( O
)
NLY
M ] button; while holding it
    
M
ANUAL
B
EFORE
M
ICROPROCESSOR
[ POWER ] Switch
[ POWER ] Switch
[ POWER ] Switch
Y B
OU EGIN
[ A M ] Button

[ MENU ] Button
[ FAST ] / [ LOCK ]
Button
Page 7