Working With Frequency Mode - Motorola MICOM-2E ALE Owner's Manual

Working with Frequency Mode

To enter Frequency mode:
1. Press to display the Menu screen.
2. Press [FREQ].
3. Press the function key beneath the frequency option
of your choice (see the section entitled "Setting
Frequencies" on page 19).
4. Press to confirm your choice.
Frequency mode is accessible only if the radio is not
locked.
Once you are in Frequency mode, the mode options appear in the LCD
display:
T/R - sets the transmit and receive frequencies and frequency type.
BAND - toggles between upper side band (USB) and lower side band
(LSB).
SQ - toggles the noise squelch on and off.
DSP - displays the Digital Signal Processing
menu (see pages 13-15 for submenus).
PWR - displays the Power Tx Setting menu.
MODE - displays the Mode menu.
NOTE
Operating Instructions
17