Transceiver Rear Panel
1
4
No.
Name
1
Antenna socket
2
Accessory
connector (J3)
3
DC connector (J4)
4
Ground screw
Alert Tone Indications
The MICOM-2E generates some audible tones, enabled via the RSS or
front panel programming, to indicate radio operating conditions. The
intensity of the tone, low or high, may also be set using the RSS or by
programming through the front panel.
Tone
Valid key press:
PTT release:
2
3
Description
25-pin connector used to connect the radio to
external accessories such as: personal
computers, external modems, Morse key, etc.
Power.
Description
A beep is sounded when a keypad key is pressed to
indicate that the key was accepted.
A beep is sounded on the remote radio to indicate
that the PTT button was released.
Overview
9