Motorola MICOM-2E ALE Owner's Manual page 69

MICOM-2E-ALE Owner's Manual
Programming Channels
When you choose the CHAN option in the Radio Programming menu,
you see a menu with the following options:
GET - Get programmed channel
STOR - Store channel
ERAS - Erase programmed channel
PWR - Tx power level
FREQ - Frequency
BAND - Band type
MODE - Radio mode
AGC - Automatic Gain Control
BW - Band width
The use of each option is explained in the following sections.
Channel Options
The first three options, GET, STOR, and ERAS, are used for
programming channels in MICOM-2E.
GET retrieves channels already programmed in MICOM-2E. Once a
channel is programmed in MICOM-2E, it is stored with all its
parameters. Retrieving a channel retrieves all the parameters defined
for the channel.
30