Motorola MICOM-2E ALE Owner's Manual page 54

To copy a channel's parameters to another channel:
1. Enter the Radio Programming menu (steps 1-4 on
page 29).
2. Press [CHAN].
3. Press [GET].
4. Enter the number of the channel to which you want
to copy the parameters with the keypad.
5. Select the source channel.
6. Press [STOR].
Note that the channel number is flashing, which indicates that you can
change it or leave it at the current number.
7. Enter the number of the channel to which you want
to copy the parameters with the keypad.
If you need to backspace, press
If you want to clear the display, press
8. Press to confirm.
Programming the Radio
[BACK].
[CLR].
31