Transmitting Individual Calls - Motorola MICOM-2E ALE Owner's Manual

MICOM-2E-ALE Owner's Manual

Transmitting Individual Calls

MICOM-2E can initiate an individual call while in Channel mode or ALE
mode. The procedure is the same as for net calls. See the following
section for the procedure.
To make an individual call:
1. Press [CALL].
The LCD display shows the last called station.
2. Press to scroll between the stations.
The LCD display shows the programmed network, the programmed
member stations in each network, and the programmed entries into the
dialing directory.
3. Choose a station or directory entry from the list.
4. Press [SEND].
Optionally, you can also transmit a preprogrammed message.
5. Press [PAGE].
6. Press [-->] to scroll through the message.
7. Press [SEND].
58