Micom-2E Options And Accessories; Transmitter Features - Motorola MICOM-2E ALE Owner's Manual

MICOM-2E-ALE Owner's Manual

MICOM-2E Options and Accessories

RS232 remote control interface
Linear amplifier interface
Phone patch interface
Data/fax modem interface
Interlink interface
RSS for PC
High (0.1 PPM) frequency stability
Phone patch
Interlink
Desktop microphone
Automatic antenna tuners
Continuous duty data transmission kit
AC power supply
1 kW amplifier
Antennas and grounding
Data/fax modems
CW key and headphones
External speaker

Transmitter Features

The maximum output power of the transmitter is 125 W PEP (Peak
Envelope Power), with an average transmission duty cycle of 1 to 4,
thus enabling even the CW (Continues Wave) signal to be transmitted at
the maximum available power. Output power can be preprogrammed to
one of the four possible levels: 25W, 62.5W, 100W and 125W. Accurate
sensors are used to keep the output power within the nominal value.
The transmitter includes thermal protections. If, for any reason, the
transmitter internal temperature exceeds the maximum permitted
temperature, the output power is automatically reduced to avoid any
fault due to excessive heat.
Mismatch protection is also included. If the VSWR (Voltage Standing
Wave Ratio) rises to more than 2:1, the transmitter will be inhibited in
order to avoid any damage and a message will be displayed.
2