Alternate Display Time-Out (Adt) - Motorola MICOM-2E ALE Owner's Manual

Alternate Display Time-out (ADT)

This menu sets the time-out time of the menu display. You define the
number of seconds that elapse before the display returns to the
previous screen.
To set the time-out time:
1. Enter the Radio Programming menu (steps 1-4 on
page 29).
2. Press [PRMT].
3. Press to scroll to the ADT option.
4. Press [ADT].
5. Press [<--] to decrement the displayed value by 1.
Press [-->] to increment the displayed value by 1.
Press [1], to quick-set the value to 1.
Press [10], to quick-set the value to 10.
6. Press to confirm, to cancel.
Programming the Radio
43