Motorola MICOM-2E ALE Owner's Manual page 48

Changing a Password
To change the password:
1. Enter Password mode.
2. Enter the old password with the keypad.
You can use the function keys to move the cursor to
the left or right or to clear the display to start over, as
shown in the display when you start to enter the
password.
3. Press [O.K.] after you enter the old password.
If you enter the wrong password, MICOM-2E
displays an error message.
4. Enter the new password with the keypad.
5. Press [O.K.] to confirm the new password.
Operating Instructions
25