Advertisement
Layout
PS/2 Keyboard
connector
PS/2 Mouse
connector
Hardware Installation
Note: For low profile systems, replace the currently
mounted bracket with the included low profile bracket.
General instructions for installing the card are provided
below, since the design of computer cases and
motherboards vary. Refer to your computer's reference
manual for further information, if needed.
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer case for a few
seconds. Avoid any contact with internal parts and
handle cards only by their external edges.
1.
Turn OFF the power to your computer and any
other connected peripheral devices. Unplug the
power cord.
2.
Remove your computer cover and install the card in
an available PCI slot.
2
Figure 1: Layout
Advertisement
