Advertisement
Quick Links
Introducing the Low Profile POS 2000RJ
The Low Profile POS 2000RJ is a high-speed plug-n-play PCI bus serial
I/O card that provides 5V or 12V DC output.
Features and Benefits
• Provides two RJ45 high-speed serial ports which can be
individually configured as standard RS232 serial ports or RS232
serial ports with 5V/12V DC output
• Supports both 8-pin and 10-pin RJ45 cable for device connections
• Conforms to PCI v2.2 Plug and Play
• Full support for DOS and Windows based applications
• Improves I/O access speed up to 8 times faster than existing
ISA-bus serial ports. Reduces CPU load and improves system
performance dramatically
• IRQ sharing feature eliminates IRQ conflicts
• Works with 56K V.90 external modems, ISDN terminal adapters,
PDAs, digital cameras, label printers and other serial port devices
• Built-in 16-byte (32-byte for 16650 model, 128-byte for 16850
model) FIFO buffers dramatically increase data transmit/receive
speed, especially under Windows multitasking environment
System Requirements
• Pentium or equivalent computer with an available 32-bit PCI slot
• DOS/Windows 3.1x, Windows 95/98/98 SE/ME/NT 4.0/2000/
XP
Package Contents
• One Low Profile POS 2000RJ board
• One Driver Installation diskette
• One 5-year warranty card
• This quick installation guide
04-0241A
Low Profile POS 2000RJ
Quick Installation Guide
1
Advertisement
Related Manuals for SIIG Low Profile POS 2000RJ
Summary of Contents for SIIG Low Profile POS 2000RJ
- Page 1 Low Profile POS 2000RJ Quick Installation Guide Introducing the Low Profile POS 2000RJ The Low Profile POS 2000RJ is a high-speed plug-n-play PCI bus serial I/O card that provides 5V or 12V DC output. Features and Benefits • Provides two RJ45 high-speed serial ports which can be...
-
Page 2: Hardware Installation
Hardware Installation General instructions for installing the card are provided below, since the design of computer cases and motherboards vary. Refer to your computer’s reference manual for further information, if needed. Caution: Static Electricity Discharge may permanently damage your system. To avoid possible static electricity discharge during the installation, please follow the guidelines below: •... - Page 3 RJ45 8-Pin Pin Definition Pin # CD or Signal Signal 5/12V Standard RS-232 DB9 pin Definition P in # S ignal DT R G N D D S R RT S CT S RI Pin Jumper Settings Port Mode Port 1 Port 2 Port 1 1-2 S...
-
Page 4: Board Layout
CD Pin Jumper Settings Port Mode Port 1 Port 2 Port 1 1-2 S Port 2 1-2 S Port 1 2-3 S Port 2 2-3 S Key: O=Open, S=Short, -=N/A Note: Only one voltage output can be selected at a time. - Page 5 Jumper Description • JP1: Select 5V/12V when voltage output is selected • JP2: Select RI/voltage output for Port1 • JP3: Select RI/voltage output for Port2 • JP4: Select CD/voltage output for Port1 • JP5: Select CD/voltage output for Port2...
-
Page 6: Software Installation
Software Installation This section provides information on how to install the Low Profile POS 2000RJ drivers for the following operating systems: Windows 95b/98/98 SE/ME Windows NT 4.0 Windows 2000 Windows XP DOS/Windows 3.1x Windows 95b Driver Installation 1. At the Update Device Driver Wizard window, click Next. - Page 7 Windows and click Finish. To verify successful installation in Windows NT 4.0: 1. Go to Start / Setting / Control Panel, double click SIIG Cyber PCI 20X device icon. 2. New COM port address and LPT number will be assigned for the ports when successfully installed.
- Page 8 Windows 2000 Driver Installation 1. At the New Hardware Wizard, click Next. 2. Select Search for a suitable driver for my device (recommended) and click Next. 3. Select Specify a location, uncheck the other options and click Next. 4. Insert the Driver Installation diskette, type in A:\Win2K and click OK.
- Page 9 RMA number posted on the outside of the shipping carton. Step 3: Ship the Product You are responsible for the cost of shipping back to SIIG at the following address: SIIG, Inc.
- Page 10 Fremont, CA 94538-3152 Low Profile POS 2000RJ is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation.