Advertisement
3.
Carefully align the card to the selected PCI slot,
push the board down firmly, but gently, until it is
well seated.
4.
Replace the slot bracket holding screw to secure the
card.
5.
Connect the PS/2 keyboard and/or mouse to the
appropriate PS/2 connector.
6.
Replace the computer cover and reconnect the power
cord.
Driver Installation
Just install the board and Windows will automatically
detect and install the correct drivers for it. No additional
driver is necessary.
To Verify Windows Installation
The only way to verify the board works is actually
connecting a device to the PS/2 port.
Note: Keyboard or mouse cannot be use in DOS
using a bootable disk or for entering the system
BIOS. It is not supported.
3
Advertisement
