Setting The Airstation Ip Address (Windows) - Buffalo Tech WPL-05G300 Series User Manual

Chapter 3 Configuration
4
Follow the on-screen instructions to install the AirStation Configuration Tool.
5

Setting the AirStation IP Address (Windows)

Follow the procedure below to set the AirStation IP address on a Windows computer.
1
Start the AirStation Configuration Tool.
Click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [AirStation Configuration Tool].
2
WPL-05G300 Series User Manual
After installation is completed, click
[Finish].
Click [Next].
19