Cannot Connect To The Network Wirelessly; You Forgot The Airstation's Ssid, Encryption Key, Or Password - Buffalo Tech WPL-05G300 Series User Manual

Chapter 5 Trouble Shooting

Cannot connect to the network wirelessly.

• Configure your wireless client with the same SSID, encryption type, and encryption key as set on
the AirStation.
The factory defaults are:
SSID -
Encryption Type - WPA/WPA2 mixed mode - PSK (Connect with either WPA-PSK TKIP or WPA2-
Encryption Key -
Note: Encryption is disabled by default in Asia Pacific.
• Place your AirStation and wireless devices 2 - 10 feet apart.
• Restart your AirStation.
You forgot the AirStation's SSID, Encryption Key, or
Password.
Hold down the reset button on the base of your AirStation for 3 seconds to initialize its settings. All
settings, including your password, SSID, and encryption key will be initialized to their defaults. The
factory defaults are:
SSID -
Encryption Type -
Encryption Key -
WPL-05G300 Series User Manual
BUFFALO-XXXXXX (the last 6 digits of the AirStation's MAC address)
PSK AES).
Printed on the label of the AirStation.
BUFFALO-XXXXXX (the last 6 digits of the AirStation's MAC address)
WPA/WPA2 mixed mode - PSK (Connect with either WPA-PSK TKIP or
WPA2-PSK AES).
Printed on the label of the AirStation.
(Encryption is disabled by default for Asia Pacific AirStations.)
101