Buffalo Tech WPL-05G300 Series User Manual page 10

Chapter 1 Product Overview
8
AOSS Button
To initiate AOSS, hold down this button until the Security LED flashes (about 1 second). Then,
push or click the AOSS button on your wireless client device to complete the connection. Both
devices must be powered on for this to work.
9
PLC Button
Hold down
for 1 to 3 seconds:
Hold down
for 10 seconds:
10
Reset Button
To reset all settings, hold down this button until the amber power LED flashes (about 3
seconds). Power must be on.
11
Wireless Button
This is not used in this product.
12
Router Switch
Switches router mode between enabled, disabled, and auto.
On:
Off:
Auto:
WPL-05G300 Series User Manual
This starts the PLC connection process or cancels the connection process.
If the Power LED indicates that the PLC connection has failed, the Power
LED stops blinking.
This disconnects the PLC connection.
Router functionality is enabled (router mode).
Router functionality is disabled (bridge/AP mode).
This switches between modes automatically based on whether or not
another router is detected on the Internet port. The default setting for
this switch is Auto.
9