Buffalo Tech WPL-05G300 Series User Manual page 52

Chapter 3 Configuration
Parameter
Broadcast SSID
[Allow multiple SSIDs]
[Use Single SSID]
SSID1
SSID2
SSID3
Separate
SSID
Wireless authentication
WPL-05G300 Series User Manual
Meaning
If [Allow] is checked, then the AirStation will respond to SSID
searches from wireless devices by broadcasting its SSID. If [Allow] is
unchecked, then the AirStation ignores SSID searches from wireless
devices.
Clicking [Allow multiple SSIDs] will enable Multi Security, allowing
the use of multiple SSIDs, each with different wireless security
settings. Clicking [Use Single SSID] will disable Multi Security.
The AirStation will then allow one SSID and one type of wireless
security.
Note: When using Multi Security, enable at least one of the following:
SSID1 or SSID2.
Multi Security SSID1 can use WPA-PSK-TKIP or WPA/WPA2-Mixed for
wireless security.
Multi Security SSID2 can use WPA-PSK-AES for wireless security.
Multi Security SSID3 can use WEP for wireless security.
When enabled, wireless devices connected to the AirStation can
communicate only with the WAN-side, not with each other.
Set SSID using 1 - 32 alphanumeric characters.
Specifies an authentication method used when connecting to a
wireless device.
51