Buffalo Tech WPL-05G300 Series User Manual page 13

Chapter 2 Installation
1
Make sure you can connect to the Internet without the AirStation.
2
modem or router
Internet
3
Connect the AirStation to the power outlet.
4
Once the AirStation is turned on, check that the LEDs appear as shown below:
Power
PLC
Wireless
Router
For LED locations, refer to chapter 1.
WPL-05G300 Series User Manual
Room 1
AirStation
Green LED on
Off
Green LED on or blinking
Off
Connect one end of the LAN cable to the
modem or router, and connect the other end
to the Internet port of the AirStation.
Turn on the modem or router.
12