Buffalo Tech WPL-05G300 Series User Manual page 15

Chapter 2 Installation
8
Check that the LEDs appear as shown below when the AirStation power is turned on.
Power
PLC
Wireless
Router
For LED locations, refer to chapter 1.
Note: If the PLC LED does not turn on after one minute, move the second AirStation closer to the first
AirStation installed in step 3.
9
10
Start your browser. If the home screen is displayed, setup for the second AirStation is
complete.
Note: If the home screen is not displayed, check that the AirStation and computer are connected correctly.
WPL-05G300 Series User Manual
Green LED on
Green LED on
Green LED on or blinking
Off
Room 2
Connect the AirStation to your computer or TV.
If using a wired connection, connect the
AirStation LAN port to your computer or TV
with a LAN cable.
If connecting to your computer with a wireless
connection, see Chapter 4.
AirStation
14