Dmz (Router Mode Only) - Buffalo Tech WPL-05G300 Series User Manual

Chapter 3 Configuration
Parameter
LAN Side IP Address
LAN Side Port
Port Forwarding Registration
Information

DMZ (Router Mode only)

Use this screen to configure a destination to transfer communication packets to when you don't
have a LAN-side destination.
Parameter
IP Address of DMZ
WPL-05G300 Series User Manual
Meaning
Enter the LAN-side IP address (after translation) for the port
translation table entry.
Select the LAN-side (after translation) port number (1 - 65535) for
the port translation table entry.
Shows current entries in the port translation table.
Meaning
Enter the IP address of the destination to which packets which are
not routed by a port translation table are forwarded.
Note: RIP protocol packets (UDP port number 520) will not be
forwarded.
65