Buffalo Tech WPL-05G300 Series User Manual page 39

Chapter 3 Configuration
Parameter
PPPoE Connection No. *-Add
Preferred Connections
[Edit Preferred Connections]
Preferred PPPoE Connection -Add
WPL-05G300 Series User Manual
Meaning
Keep Alive
If Keep Alive is enabled, then the AirStation will issue an LCP
echo request once a minute in order to maintain the connection
with the PPPoE. If the server does not respond for more than
6 minutes, the line is recognized as disconnected and the
AirStation will terminate the connection. [Disabled] is the
recommended setting.
You can add up to 5 preferred connections.
Click to edit the connection destination route settings.
Click [Edit Preferred Connections] to display.
Name
The destination to connect by PPPoE if [Destination address] and
[Source address] match. Select the destination registered to the
PPPoE Connection List.
Destination address
When communicating to this address, the AirStation will
communicate with [Name of Connection.]
Source address
When communicating from this address, the AirStation will
communicate with [Name of Connection.]
38