Chapter 5 - Troubleshooting; Cannot Access Settings; Cannot Connect To The Network Wirelessly; Forgot Airstation's Ssid, Encryption Key, Or Password - Buffalo Tech AirStation WMR-300 User Manual

Chapter 5 - Troubleshooting

Cannot Access Settings .

• See chapter 3 for instructions to open Settings .
• Enter the correct username and password to log in to Settings . If you are using AirStation with factory default
settings, enter "admin" for the username and "password" for the password.
• Verify that your web browser is not set to use proxies.
• Make sure that your computer is configured to "obtain an IP address automatically from DHCP".
• Restart your AirStation.

Cannot Connect to the Network Wirelessly.

• Configure your wireless client with the same SSID, encryption type, and encryption key as set on the AirStation.
The factory defaults are:
SSID (11n/g/b) - Buffalo-G-XXXX (the last 4 digits of the AirStation's MAC address).
Encryption Type - WPA2 - PSK AES, or none.
Encryption Key - Printed on the label.
Note: For details, refer to the label.
• Place your AirStation and wireless devices 2 - 10 feet apart.
• Restart your AirStation.

Forgot AirStation's SSID, Encryption Key, or Password.

Hold down the reset button on the base of your AirStation for 3 seconds to initialize its settings. All settings, including
your password, SSID, and encryption key will be initialized to their defaults.
With the AirStation powered on, hold down this button for 3 seconds to return it to factory default settings.
47