Buffalo Tech WPL-05G300 Series User Manual page 136

Chapter 2 Powerline Manager Features
Parameter
Network Type
Rename
Enter Password
Add
Scan
Note: If the PLC adapter does not appear in the "Local Device(s) on your computer" box, check
whether the computer and PLC adapter are connected by a LAN cable.
If the PLC adapter does not appear in the list even though it is connected by a LAN cable,
reinstall Powerline Manager.
When reinstalling Powerline Manager, if a screen is displayed for installing WinPcap, click
[OK] to also reinstall WinPcap.
Powerline Manager User Manual
Meaning
This displays the PLC adapter network type.
To rename a device on this list, highlight it and click this button.
Enter the Device Password required to change the settings for each
PLC adapter. Enter the Device Password (PWD) from the label of the
PLC adapter you want to control.
This displays a screen for adding a new PLC adapter connection to
the existing PLC network. Power on the new PLC adapter and enter
the Device Password (PWD) from its label.
Enter any name for the Device Name.
If AutoScan is disabled in the About screen (page 8), click this
button to search for PLC adapters over the powerline.
5