Chapter 5 - Troubleshooting; Cannot Connect To The Internet Over Wired Connection; Cannot Access The Settings - Buffalo Tech WPL-05G300 Series User Manual

Chapter 5 - Troubleshooting

Cannot connect to the Internet over wired connection.

• Make sure that your AirStation is plugged in!
• Check that the status LEDs of your AirStation are lit as below:
Power Green LED is on
PLC Green LED is on
Router Green LED is on or off (depending on your environment)
• Make sure that your computer is configured to "obtain an IP address automatically from DHCP".
(See chapter 8)
• Restart your AirStation.

Cannot access the Settings.

• See chapter 3 for instructions to open the AirStation's Settings.
• Enter the correct username and password to log in to the Settings. The factory defaults are "admin"
for the username and "password" for the password. If you changed the password, enter the new
password that you set.
• Verify that your web browser is not set to use proxies.
• Make sure that your computer is configured to "obtain an IP address automatically from DHCP".
(See chapter 8)
• Restart your AirStation.
WPL-05G300 Series User Manual 100