Configuring The Nic; Default Nic Settings - 3Com 3C905CX User Manual

10/100 pci network interface cards
Table of Contents

Advertisement

5

Default NIC Settings

Option
Network Driver Optimization
Duplex
Boot PROM
Media Type
Configuring the NIC
This chapter describes how to configure the NIC.
NOTE: Before you change the NIC configuration settings, consult your system
administrator.
The table below lists the configuration settings for the NIC. The default setting is in bold
in the Settings column.
Description
Specifies how to optimize the network driver for your network by
allowing trade-offs between network performance and CPU utilization.
Normal balances CPU utilization and network performance.
I
Minimized CPU Utilization saves CPU resources for other tasks.
I
Maximized Network Performance is appropriate if no other
I
applications are making major demands on CPU resources.
Determines if the NIC transmits data across the network in both
directions simultaneously (full-duplex) or in one direction at a time
(half-duplex).
Auto Select allows the NIC to automatically connect at the duplex
I
mode of the connected hub or switch. When you select this setting,
the Media Type is automatically set to Auto Select.
Full-Duplex sets the NIC to operate in full-duplex mode. To use this
I
setting, the switch that you are connected to must support full-
duplex. You must also manually set the NIC Media Type setting.
Half-Duplex sets the NIC to operate in half-duplex mode. You must
I
also manually set the NIC Media Type setting.
Enables or disables the NIC's boot ROM (if a boot ROM is installed on
the NIC).
Determines the type of media your network is using.
Auto Select allows the NIC to automatically select the Media Type
I
for you.
If you set the NIC Duplex setting to Auto Select, the Media Type is
I
automatically set to Auto Select.
If you set the NIC Duplex setting manually, you must set the Media
I
Type setting manually.
Settings
Normal
I
Minimized CPU
I
Utilization
Maximized Network
I
Performance
Auto Select
I
Full-Duplex
I
Half-Duplex
I
Enabled
I
Disabled
I
Auto Select
I
10BASE-T (10Mb/s)
I
100BASE-TX (100Mb/s)
I
AUI
I
BNC
I
100BASE-FX
I
10BASE-FL
I
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3c905c3c905b3c900b

Table of Contents