ELECtrICAL ConnECtIon (220-240 VoLtS)
the appliance is supplied with a standard 7.5 Amp
service cord terminated by a 3-pin plug for connection
to a standard household socket. the electrical supply is
required to power the electronic ignition system.
NOTE! It will be necessary for servicing purposes to
disconnect the electrical power supply. The power
point should therefore be accessible after the appliance
is installed, as specified in the local wiring regulations.
Diagram 1 is a schematic of the wiring in the appliance.
WEIGHT of the unit is printed on the appliance
Diagram 1a – All models except EHG313BA
Diagram 1b – model EHG313BA
to BurnEr SpArK pLuGS
to BurnEr SpArK pLuG