Making The Electrical Connection - Electrolux E36GC76EPS Installation Instructions Manual

MAKING THE ELECTRICAL CONNECTION

WARNING WARNING
WARNING WARNING WARNING
• Ensure that the power supply is disconnected before proceeding.
• Verify that the power supply matches the ratings found on the appliance data
plate before proceeding.
• The complete appliance must be properly grounded at all times when electrical
power is applied.
• Do not ground the appliance with the neutral (white) house supply wire. A
separate ground wire must be utilized.
• If aluminum house supply wiring is utilized, splice the appliance copper wires to
the aluminum house wiring using special connectors designed and agency-
certified for joining copper and aluminum.
• Follow the connector manufacturer's recommended procedure carefully.
Improper connection can result in a fire hazard!
• Do not attempt to use this appliance in the event of a power failure.
• Do not use an extension cord with this appliance.
• Do not install a fuse in the neutral or ground circuit.
• Do not ground this appliance to a gas supply pipe or hot water pipe.
Plug the three-prong plug from the appliance into the properly grounded and
polarized wall receptacle.
Installation
17