Table of Contents
Advertisement
LAN1
LAN2
HD Access LED
Red on
Green Blinks
Red On
Green On
during access
Red Blinks (Fast)
Green Blinks (Fast)
Red off
Amber on
Off
Amber Blinks (Slowly)
Power Jack
Interface
Power Jack
e-SATA
RS-232
LAN Jack (LAN1)
LAN Jack (LAN2)
USB Socket
PCI-E Port (optional)
Yellow(10M link)、Green(100M link)、Amber(1000M link)
HD LED(Power/Fault)
NAS-7450 Rear View
RS-232
e-SATA
Connect the two power supply cord shipped with the system
Connect to External hard drive case
Connect to UPS
These RJ-45 ports support auto negotiating Fast Ethernet
10/100/1000 Base-TX networks. That allows your system to be
connected to an Internet Access device, e.g. router, cable
modem, ADSL modem, through a CAT.5 twisted pair Ethernet
cable.
Connect to UPS and external HDD(FAT/FAT32)
Connect to Tape Backup or Tape Library or Network card
Description
Powering up
HDD is being accessed
RAID building, rebuilding, expanding
Volume un-mounted and HDD is ready for being
hot-up plugged
Disk faulty.
Blinking interval is about 2 seconds
USB
LAN Jack
Description
PCI-E
7
Advertisement
Table of Contents
